If you’re looking to make sure your basement is dry and usable at all times, it’s crucial that you maintain your home’s sump pump. The sump pump is going to be what ensures your basement is dry and doesn’t have any problems with water overflowing.
However, too many homeowners don’t understand why a sump pump is so crucial to normal basement functioning. If you don’t know why a sump pump is important, you might decide to bypass using this device, instead opting for other ways to keep your basement dry. While other options are available, a sump pump is a heavy-hitting and long-term fix. By trying to cut corners and save money with other fixes, you might end up spending more in the long run or experiencing unsatisfactory results.
The good news is that if you’re trying to install a sump pump in Minnesota, North Dakota, or eastern Montana, Innovative Basement Authority can help. Here’s what you should know about the process an expert will go through to keep your basement clean and effective.
The Six Steps to Creating a Dry, Usable Space in Your Basement
There are typically six steps an expert will go through when they’re trying to help you maintain your basement and ensure it is usable. From start to finish, a sump pump expert will go through these six steps to maintain your basement.
Step 1: Placing the Sump Pump Liner
The first step is to place a liner or basin in the ground. This is a case for the sump pump and makes sure the pump doesn’t have to deal with dirt and debris.
- Ensuring the Correct Sump Pit Size
The sump pit is where the sump pump goes so that it sits flush with the basement or crawl space, rather than sitting above the space. Sump pits that are too small won’t allow water to accumulate in the pit appropriately, which will make the pump turn off and on frequently; sump pits that are too large will go deep into the ground and cause your pump to do too much work.
- Placing the Sump Pump Appropriately
The sump pump needs to be in the right place. Most commonly, this means ensuring that the sump pump is at the lowest part of the basement or crawl space. A laser level will typically be the best way for the expert to determine the lowest area of the basement or crawl space.
- Excavating a Pit for the Pump
Once you’ve positioned the pit and determined the right space for the pit, the expert will dig out the pit. They may use a combination of power tools and hand tools to dig out the pit and make sure it’s exactly appropriate for your sump pump needs.
Step 2: Installing a Perimeter Drainage System
It’s crucial that you have an interior perimeter drainage system along with your sump pump. This perimeter drainage system will help you with your sump pump’s continuous functioning.
- Removing the Floor Around the Edge of the Basement
The first step is to jackhammer the floor all around the edge of the basement. Then the expert will set down a layer of clean stone. This clears out space for the drain itself, which needs an area around the edge of the basement.
- Installing the Perimeter Drain
Next, the expert will actually install the perimeter drain. Then, more clean stone will backfill above the perimeter drain. There are many different perimeter drains out there and a basement or crawl space expert will be able to point you toward the right drain for your home’s needs.
- Managing the Benefits and Needs of the Drain
In the future, you’re going to have to maintain and manage the drain itself. There are many different ways for you to do this. However, clearing out any visible debris and doing yearly inspections of your basement or crawl space are two things that will go a long way in doing this.
Step 3: Installing the Sump Pump Itself
Though it might surprise you, this is how long it takes to install the sump pump itself. The sump pump installation doesn’t take place until this third step because the previous two steps help ensure the continued functioning of the pump.
- Connecting the Perimeter Drain to the Sump Pump System
The perimeter drain needs to connect to the sump pump system. An outlet will connect the drain to your sump pump system, allowing the system to pump the water out as it collects in the perimeter drain. There may be two discharge lines if you have a secondary sump pump.
- Adding Gravel Around the Sump Pump
Clean gravel will go around the sump pump itself, forming a barrier between the sump pump and the area around it. This will discourage silt and sediment from coming into the liner, which can clog the sump pump system, especially if it happens often over a long period of time.
- Placing an Airtight Sump Pump Lid on the System
A sump pump lid, which will include rubber grommets around the pipes and wires, is a crucial element of maintaining both a healthy sump pump and a healthy basement or crawl space. It’ll avoid humidity coming out of the sump pump, but it’ll also prevent items and debris from falling into the sump pump, potentially damaging it.
Step 4: Restore the Floor and Bury the Discharge Line
Now that everything’s in place and hooked up, it’s crucial that the sump pump expert puts everything back appropriately. That way, it can continue to function normally.
- Maintaining a Flush Floor Restoration
Restoring the floor to a flush position will maintain a clean, attractive look. The Innovative Basement Authority sump pump system ensures there’s no gap around the perimeter of the basement floor, which is a healthier and cleaner way to maintain your sump pump system.
- Installing an Anti-Freeze System
The discharge line needs protection to ensure it doesn’t freeze over in the winter if temperatures get that cold in your area. An anti-freeze system like FreezeGuard™, which Innovative Basement Authority can install, will ensure your sump pump continues to work even if you have freezing problems in the discharge line.
- Burying the Discharge Line Appropriately
To ensure the sump pump pushes water out in the right way, an expert will bury the discharge line properly in your yard. A special outlet will go into the lawn, flush with the ground. It should be safe for a lawnmower or lawn tractor and will typically not stand out against your lawn’s appearance.
Step 5: Clean the Basement and Maintain Finishing Touches
One reason some homeowners might decide not to install a sump pump is that they’re worried about the mess that might go along with it. A high-quality installation process won’t leave behind a mess.
- Cleaning Dust and Debris
The sump pump installation crew should ensure it cleans out any dust and debris it leaves behind when it does things like jackhammer the perimeter or dig out the sump pit. Innovative Basement Authority’s crew takes great care to leave the basement clean and neat.
- Inspecting the Discharge Line
Before the sump pump installation crew leaves, they should inspect the discharge line to ensure the water actually discharges to the appropriate location. Only by actually seeing the sump pump direct water out of the home will the crew be able to ensure the pump is working appropriately.
- Allowing for Future Inspection and Testing
The sump pump installation should always allow for inspection and testing in the future. Innovative Basement Authority installs ports in the perimeter drain that a future expert can use for a dehumidifier drainage line or a hose. That way, they can test and inspect the sump pump process when you call in your yearly inspection.
Step 6: Upgrade the Basement for the Future
This might not technically be a step for sump pump installation, but it should be one that you think about. There are a number of different things that you can install if you’re looking for an upgrade.
- Basement Waterproofing
A sump pump is an important part of your basement waterproofing process, but it’s not the only part. If you want to make sure that your basement waterproofing is as effective as possible, you’re going to need more than just a sump pump to maximize your basement’s dryness. Talk to an Innovative Basement Authority expert to learn more.
- Battery-Backup Sump Pumps
Most of the time, a sump pump will use AC power, which connects to a typical electrical plug, to power the pumping process. However, what will you do if the power cuts out in the middle of a storm? In this case, you might need a battery-backup sump pump to help you pump out the remaining water.
A dehumidifier isn’t the only way to avoid high levels of humidity in your basement or crawl space, as you should definitely take a look at other methods of avoiding water first, but it’s a crucial element of helping with humidity levels. Installing a dehumidifier can help you with your basement or crawl space humidity.
Sump Pump Installation
Installing your sump pump can be a complicated procedure, but it’s even more complicated when you realize you might need to install more than one. There are a number of reasons you might want to install more than one sump pump in your crawl space or basement, and these are just a few of those reasons.
- When You Have a Large Basement or Crawl Space
If you have an especially large basement or crawl space, you may run into a problem with water overflow coming in from a variety of places. This can overwhelm your sump pump, especially if the sump pump doesn’t have a very significant capacity. An extra sump pump can help with this problem.
- When You Regularly Have Issues with Water Overflow
Even if you have a relatively small basement or crawl space, it’s possible to live in an area where water overflow is extremely prominent and flooding is a regular problem. If this is something that you often deal with, you might want to consider adding a second sump pump to your basement or crawl space so you can avoid flooding.
- As an Added Protection
Even if you don’t think you’re going to have problems with too much water coming into your crawl space or basement, a second sump pump still gives some extra protection. Essentially, if your primary sump pump starts malfunctioning due to power problems or another malfunction, the secondary sump pump can kick in.
Basement waterproofing isn’t as easy as installing a sump pump and leaving it alone. Sump pumps are definitely a crucial part of basement waterproofing, but they’re not the only things you need to waterproof your basement. Here’s what you need to know about basement waterproofing.
- Initial Basement Waterproofing
When you first go to waterproof your basement, there are a few things you’re going to need. For example, you’ll likely need a liner of some kind, a sump pump, and a drainage system. These are portions of the initial basement waterproofing process, and they’re all very important to maintain your basement waterproofing.
- Other Basement Waterproofing Needs
Aside from the initial basement waterproofing process, there are other things you might need to consider so you can make sure your basement maintains its waterproofed status. For example, you might install a dehumidifier or a vapor barrier, and call out a waterproofing expert every year to ensure everything is working as intended.
Ensuring that your sump pump is high-quality is just one of the things you need to do if you’re going to ensure it continues working for a long time. However, many homeowners don’t know how to ensure they have a high-quality pump. Here are a few of the things you can do to ensure the quality of the pump.
- Get It from an Expert
One of the best ways to ensure your sump pump is high-quality is to make sure you get your sump pump from an expert. An expert will be able to take a look at your basement or crawl space, determine what’s going to be the best option for your area, and find a sump pump that uses the best materials and will last a long time.
- Personalize Your Sump Pump Needs
Sump pumps are definitely not a one-size-fits-all situation. The reason there are so many different sump pump designs out there is that it’s important to tailor your sump pump choices to the basement or crawl space you have. If you don’t consider your unique home needs, you’re not going to get a sump pump that fits those needs.
DIY is definitely a great option for many things in and around your home. The problem is that sump pump installation is not one of those things. Because it’s so much more difficult than most things, you’re probably going to have a hard time if you try to approach it with DIY. Here’s what you should know about DIYing your sump pump installation.
- The Issues With DIY
The biggest problem with DIY is the same reason it’s so beneficial. Essentially, DIY allows you to perform your own service. However, that means a non-expert is doing that service. If you’re doing your own sump pump installation, you’re much more likely to make a mistake because you’re not an expert.
- The Benefits of an Expert’s Help
At the end of the day, the best option is always going to be to request help from an expert. Although an expert might not be necessary for every job in your home, it’s crucial for your sump pump. Talk to an Innovative Basement Authority expert to learn more about your options.
Install Your Sump Pump More Effectively with Innovative Basement Authority’s Help
When you install a sump pump, you naturally want to make sure that the sump pump is as effective as possible. If you have an ineffective sump pump, after all, it’s not going to pump water out of your basement. That means it’s not really going to do anything for your basement’s health.
Instead of assuming you can install a sump pump on your own or that your sump pump installation is easy enough for anyone to do it, you need to trust an expert. An expert will be able to help you with your sump pump installation, ensuring you’ll have a sump pump that functions for years to come. Innovative Basement Authority is one of the best expert sources to trust when it comes to your basement or crawl space. With a sump pump from Innovative Basement Authority, you can ensure you’re getting the best coverage possible. If you’re looking for sump pump installation, you can get a free estimate from Innovative Basement Authority today.